Vertical Machining Centers

 HOME/Vertical Machining Center/New V Series/V-30S
  Vertical Machining Centers - V SeriesVertical Machining Centers - New V SeriesVertical Machining Centers - MCV SeriesVertical Machining Centers - 5 axis
  Vertical Machining Centers - New V Series
 
  V-12iP | V-20S | V-30S | V-40M | V-40L | V-50L
   
 
Vertical Machining Centers - New V Series - v-30s
Vertical Machining Centers - New V Series - v-30s
LEADWELL's mission is to constantly search for excellence and gain respect in the industry. Using our 25 years of experience, the entire staff at LEADWELL pledges to bring innovation, quality assurance, worldclass after sales service, and environmentally friendly machine tools to the worldwide marketplace. We strive to win the respect of both our customers and world wide competitors alike.
   
 
Major Machinning Types: Drilling | Milling | Boring | Slotting

New V Series - v-30s - Drilling New V Series - v-30s - Milling New V Series - v-30s - Boring New V Series - v-30s - Slotting

A) Chip Removal
New V Series - v-30s - A) Chip Removal LEADWELL's simple and efficient design uses chip augers on both sides of the machine and provides high volume coolant to wash the chips from the work area.
B) Linear Guide Ways
New V Series - v-30s - B) Linear Guide Ways

LEADWELL uses linear guide ways that feature zero clearance and fully-loaded carrying capacity in all directions.
Cartridge type spindle
New V Series - v-30s - Cartridge type spindle

The heavy-duty spindle utilizes FAG,NKS or SKF bearings to allow heavy cutting.Oversized disk springs used to hold the tool in the spindle are tested for long life.The high retention force of springs reduce tool movement, imporve tool life, allow heavier cutting,reduce chatter, & create a better part finish. This spindle is prepared to easily add the CTS option.
Double Nut Ball Screws

New V Series - v-30s - Double Nut Ball Screws
LEADWELL uses only premium quality preloaded double-nut ball screws from high quality supplirt on the machines.Each ball screw is accurely aligned parallel to the guide ways and anchored at both ends.They are then pretensioned to improve machine stiffness. Ball screw tail bearing supports are integral to the castings for extra rigidity.With the design the can excessd customer requirements for accuracy and maximum life.


Rotational torque variations are measured to guatantee a non-binding, highly accurate, and long running component.

Directly Coupled Servo Motors

New V Series - v-30s - Directly Coupled Servo Motors
The NEWV series servo motors are connected directly to the ball screwswith rigid shaft couplings.These couplings ensure that even under severe loading from sharp maching, precise interpolations is achieved.This design is superior to both belt driven and flexible shaft coupling designs.


New V series motors have 1,000,000 pulse encoders for high accuracy positioning of linear axes


Motors are the same between all axes which reduces spare part requirements.

Coolant Through Spindle (CTS)

New V Series - v-30s - Coolant Through Spindle (CTS)
The CTS option includes an auxiliary high-pressure pump, which supplies high pressure coolant to the cutting edge.CTS improves tool life, allows both deep hole drilling and blind pocket milling. It also allows higher speeds, which reduces cycle time.

This option can be easily added to any NEWV -series machine.

Programmable Coolant Nozzle

New V Series - v-30s - Programmable Coolant Nozzle
This unique programmable coolant nozzle option provides precise coolant contol. It allows the NC program to change the coolant direction during the machining cycle. The nozzle can be programmed for tool lengths from 60mm (2.4") to 250mm (10").

The option eliminates operator adjustment causing unnecessary downtime.

Spindle probe

New V Series - v-30s - Spindle probe
LEADWELL's spindle probe can automate workpiece setup and inspect parts.

Tool probe

New V Series - v-30s - Tool probe
LEADWELL's tool probe option measures both tool length and tool diameter. It uses macro programming to automatically define and update tool offsets.This option will reduce setup time.The tool probe option can aslso check for broken tools.

4 axis rotary table

New V Series - v-30s - 4 axis rotary table
This rotary table option boots productivity by allowing more machining options with a single setup.

The NEW V-series machines can become 4 Axis contouring machines.

Oil skimmer

New V Series - v-30s - Oil skimmer
Designed for collecting the oil dust in the coolant tank for reclamation and meeting environmental protection requirements.

Technical Specifications

Item   DRUM (STD.) ARM (OPT.)
X axis travel mm (in) 800 (31.5) 800 (31.5)
Y axis travel mm (in) 410 (16) 410 (16)
Z axis travel mm (in) 410+110 (16+4.3) 510 (20)
Table size (LxW) mm (in) 900x400 (35.4x15.7) 900x400 (35.4x15.7)
Spindle speeds rpm 8000 8000
Spindle motor (30min) FANUC kw (HP) 11 (14.7) 11 (14.7)

Accessories: Standard | Optional

Standard Accessories Optional Accessories  
  • Fully enclosure guarding
  • Chip conveyor(auger type)
  • Work light
  • Alarm lamp
  • Heat exchanger
  • Rigid tapping
  • Auto counter for work piece
  • Remote MPG
  • Surrounding coolant system
  • 10000rpm spindle
  • 12000rpm spindle
  • Spindle oil chiller
  • Two speed gearbox
  • C.T.S. Form A
  • Tool tip air blow system
  • Linear scales
  • Tool overload detection
  • Auto tool length measurement(A.T.L.M)
  • Automatic workpiece measurement
  • Simple tool life management
  • Chip conveyor outside machine & chip bucket
  • oil skimmer
  • Coolant gun
  • Air conditioner
  • Rotary table preparation
  • Manual tail stock for rotary table
  • Through hole drill kit
  • DNC link software
  • Programmable Nozzle
  • Programmable air blow
  • CTS preparation
  • Extra coolant tank
  • Auto door
  • Spindle annular coolant jet (ARM type ATC)
  • ARM (30T) ATC
  • HEIDENHAIN control
  • SIEMENS control
Machine in Action - Video Clip
Enquiry