 |
| |
|
| |
|
| |
|
 |
| LEADWELL's mission is to constantly search for excellence
and gain respect in the industry. Using our 25 years of
experience, the entire staff at LEADWELL pledges to bring
innovation, quality assurance, worldclass after sales
service, and environmentally friendly machine tools to the
worldwide marketplace. We strive to win the respect of
both our customers and world wide competitors alike. |
|
|
| |
|
| |
Major Machinning Types: Linear way | Tool setter | Chip conveyor
Functions
LEADWELL uses only top quality well-ribbed castings. Finite Element Analysis (FEA) is used on each new casting to determine the size and location of all internal ribs ensuring high torsional stiffness and minimum vibration. The cast iron base, cross slide, headstock, slide, & tailstock have over 10 times the dampening capacity of those made from steel resulting in superior cutting performance.
Headstock
The headstock is a thermally symmetric design with heat dissipating fins. This design prevents thermal distortion during long machining cycles.
Easy Chip Disposal
The T / LTC Series slant bed design allows chips to fall directly into the chip tank avoiding accumulation inside the machine. The chip tank has large wheels making it easy to move for chip removal and cleaning.
*Optional Chain Type Chip Conveyor available on all models.
Cartridge Type Spindle
 |
LEADWELL produces a superior spindle. Built with high precision P4 grade bearings, the one-piece cartridge ensures precise alignment for smooth run-out free operation. The massive headstock, rigid spindle, and superior bearing design, along with high RPM, facilitate heavy stock removal and precision tolerances.
Both the headstock and spindles are machined in a temperature-controlled environment is assembled in a clean room. |
Machine Enclosure
 |
The machine is fully enclosed with splashguards and way covers. CE approved guarding option includes tempered glass in the operator window. |
DOUBLE NUT BALL SCREWS
 |
LEADWELL uses only premium quality preloaded double-nut ball screws. On the T / LTC Series machines each ball screw is accurately aligned parallel to the guide ways and anchored at both ends. They are then pre-tensioned to improve machine stiffness. The rotational torque variation is inspected to guarantee a non-binding, highly accurate, and long running components. With this design the T-Series can exceed customer requirements for accuracy and maximum life. |
High Speed Linear Motion Guides (T series)
 |
All servo motor driven axes are mounted on precision linear bearings, which ride on hardened steel ways. These precision guideways require no adjustment, and the servo motors consume less power. With Leadwell's linear motion guides X-Axis can reach a speed of 20 m/min (787 ipm) and Z axis up to 24 m/min (945ipm). |
Tailstock (Option)
|
The heavy-duty tailstock is attached to the lower guide of the machine base. The heavy casting, large diameter quill, and precision Morse taper center provide outstanding rigidity. In addition, the quill adjustment is hydraulic adding to the rigidity of the machine.
*Optional programmable Tailstocks available on all models.
*Optional rotary tailstocks available on all models. |
Tool Setter (Option)
|
The automatic tool setter is an option on T / LTC Series machines. This tool setter has a touch sensor that can measure varying tool lengths and detect broken tools. It can be easily programmed to store all the tool information to reduce tool-changing time. |
Technical Specifications
| Item |
|
|
| Max swing |
mm (in) |
637 (25) |
| Bar capacity |
mm (in) |
65 (2.5) |
| X axis |
mm (in) |
225+15 (8.8+0.6) |
| Z axis |
mm (in) |
790 (31.1) |
| Spindle speeds range |
rpm |
4500 |
| Chuck size |
in |
8 |
Accessories: Standard | Optional
 |
 |
|
- RS232 interface
- Fully enclosure guarding
- Work light
- Metric disc
- Heat exchanger
- Leveling screws and pads
- Maintenance tool box
- Buzzer
- 3" jaw open center chuck
- Foot peddle switch
- Micro V belt
- Manual tailstock
- VDI disc
- C axis and power tooling
|
- Spindle side coolant nozzle
- Tool setter
- Programmable tailstock
- Parts catcher
- Alarm lamp
- Air conditioner in cabinet
- Bar feeder
- Auto door
- Tool tip air blow nozzles
- High pressure coolant(4bar)
- Collet chuck
|
- Oil mist collector
- Chip conveyor outside machine
- Chip bucket
- 2 speed gearbox
- Chuck with high / low pressure
- Bullet proof glass
- Oil skimmer
- Transformer
|
Machine in Action - Video Clip
|
| |
|
| |
|
|
FAX: 886-4-23592555, 23593875